Call: 07938 990337

  • Showermate TP twin shower pump

Showermate TP twin shower pump

  • Product Code: TPTWIN
  • Availability: In Stock
  • £115.00 Inc VAT

Available Options

The Showermate TP Standard Twin Shower Pump is designed to boost the hot & cold water supply to an individual shower, bath, shower mixer or mixer tap. Suitable for positive head applications only.

Key Features
  • 1 year guarantee
  • 1.5 bar pressure or 2.0 bar pressure
  • Suitable for positive head applications
  • High quality entry level plastic pump supplied with 15 mm flexible hoses
  • Quiet operation
  • WRAS approved product
  • Intermittently rated
  • Anti-vibration feet
  • EPDM/Carbon/Al.Oxide seal
  • Pre-wired with 1.5 metre power cable
  • Technical Specification
    Product Code49084 or 49085
    Guarantee1 year
    WRAS approval1506334
    ApprovalsWRAS, CE
    Pump typeCentrifugal
    Pump controlFlow Switch
    Anti-vibration feet
    Inlet strainer(s)
    Flexible hoses4
    Dry run protection
    Typical noise53 dB(A)
    Pump bodyPlastic
    Mechanical sealEPDM / Carbon / Al.Oxide
    Maximum head - closed valve1.5 bar / 15 metres or 2.0 bar / 20 metres
    Performance @ 9 l/min1.0 bar or 1.5 bar
    Performance @ 18 l/min0.7 bar or 0.9 bar
    Maximum flow32 l/min or 35 l/min
    Maximum static inlet pressure10 metres
    Maximum working pressure*300 kPa / 3.0 bar
    Maximum ambient air temperature40 °C
    Min / Max water temperature**Min 4 °C / Max 65 °C
    Flow switch sensitivity0.8 l/min (approx)
    Pump connections (Inlet)G ¾ M
    Pump connections (Outlet)G ¾ M
    Flexible hoses
    Connections (Inlet)G ¾ female x 15 mm push-in x 185 mm long
    Connections (outlet)G ¾ female x 15 mm push-in x 175 mm long
    TypeSeries wound, manual reset thermal trip
    Duty ratingIntermittent S3 (30 mins on / 30 mins off @ 9 l/min)***
    Power supply (Vac/Ph/Hz)230 V a.c. / 1 / 50 Hz
    Power consumption - P1200 Watts or 300 Watts
    Current - full load1.2 Amps or 1.5 Amps
    Fuse rating3 Amps
    Power cable length1.5 metres (pre-wired)
    Enclosure protectionIPX2
    Length250 mm
    Width97 mm
    Height - excluding hoses152 mm
    Weight - including fittings2.6 Kg
    GTIN 13 DIGIT5050400490845 or 5050400490852
    *The maximum pressure that can be applied to the pump under any installation conditions.
    **A stored water temperature of 60 oC is considered sufficient to meet all normal requirements and will minimise deposition of scale in hard water areas.
    *** Both heads pumping 4.5 l/min and above.

Write a review

Note: HTML is not translated!
    Bad           Good