Call: 07938 990337
Email: info@bstaccessories.co.uk


  • Showermate TP single shower pump

Showermate TP single shower pump

  • £99.00 Inc VAT

The Showermate TP Standard 2.0 bar Single Shower Pump is designed to improve water supplies to single taps or pump blended water from a shower mixer. Suitable for positive head applications only.

Key Features
  • 1 year guarantee
  • 2.0 bar pressure
  • Suitable for positive head applications
  • High quality entry level plastic pump supplied with 15 mm flexible hoses
  • Quiet operation
  • WRAS approved product
  • Intermittently rated
  • Anti-vibration feet
  • EPDM/Carbon/Al.Oxide seal
  • Pre-wired with 1.5 metre power cable
Technical Specification
Product Code49086
General
Guarantee1 year
WRAS approval1506334
ApprovalsWRAS, CE
Features
Pump typeCentrifugal
Pump controlFlow Switch
Anti-vibration feet
Inlet strainer(s)
Flexible hoses2
Dry run protection
Typical noise56 dB(A)
Materials
Pump bodyPlastic
ImpellerPlastic
Mechanical sealEPDM / Carbon / Al.Oxide
Performance
Maximum head - closed valve2.0 bar / 20 metres
Performance @ 9 l/min1.0 bar
Performance @ 18 l/min0 bar
Maximum flow17 l/min
Maximum static inlet pressure10 metres
Maximum working pressure*300 kPa / 3.0 bar
Maximum ambient air temperature40 °C
Min / Max water temperature**Min 4 °C / Max 65 °C
Flow switch sensitivity0.8 l/min (approx)
Connections
Pump connections (Inlet)G ¾ M
Pump connections (Outlet)G ¾ M
Flexible hoses
Connections (Inlet)G ¾ female x 15 mm push-in x 185 mm long
Connections (Outlet)G ¾ female x 15 mm push-in x 175 mm long
Motor
TypeSeries wound, manual reset thermal trip
Duty ratingIntermittent S3 (30 mins on / 30 mins off @ 9 l/min)
Electrical
Power supply (Vac/Ph/Hz)230 V a.c. / 1 / 50 Hz
Power consumption - P1180 Watts
Current - full load1 Amp
Fuse rating3 Amps
Power cable length1.5 metres (pre-wired)
Physical
Enclosure protectionIPX2
Length228 mm
Width97 mm
Height - excluding hoses152 mm
Weight - including fittings2.2 Kg
GTIN 13 DIGIT5050400490869
*The maximum pressure that can be applied to the pump under any installation conditions.
**A stored water temperature of 60 oC is considered sufficient to meet all normal requirements and will minimise deposition of scale in hard water areas.

Write a review

Note: HTML is not translated!
    Bad           Good